Copper tubes for industrial applications

Round, square, rectangular and oval copper tubes for general applications

Medidas:

Round: Exterior Ø 5 to 165 mm.

Data sheet

Select the different categories of information to generate a personalized PDF file.

Description

At Bronmetal we supply high quality round, square, rectangular and oval copper tubes for industrial applications.

Alloys

Material Designation	Composition in % (m/m)	Density² g/cm³ approx.
Cu-DHP	CW024A	min.	99,90	0,015	8,9
max.	–	0,040
¹ Including silver up to a maximum of 0.015%
² Only for information.

Equivalences

EN	DIN	ASTM	AFNOR	BS	JIS	SN
Cu-ETP	CW004A	E-Cu58	20065	C11000	CuA1	C101	C1100	Cu-ETP
Cu-OFE	CW009A	–	–	C10100	CuC2	C110	–	Cu-OFE
Cu-OF	CW008A	OF-Cu	2.0040	C10200	CuC1	C103	C1020	Cu-OF
Cu-HCP	CW021A	Se-Cu	2.0070	–	–	–	–	–
Cu-PHC	CW020A	Se-Cu	2.0070	C10300	–	–	–	Cu-HCP
Cu-PHCE	CW022A	–	–	–	–	–	–	–
CuAg0,10	CW013A	CuAg0,10	2.1203	C10700	–	–	–	–
C10940
C11600
CuAg0,04P	CW014A	–	–	C11904	–	–	–	–
CuAg0,10P	CW016A	CuAg0,1P	2.1197	C11907	–	–	–	CuAg0,1P
Cu-DHP	CW024A	SF-Cu	2.0090	C12200	CuB1	C106	C1220	–
C1221
Cu-DLP	CW023A	SW-Cu	2.0076	C12000	CuB2	–	–	Cu-DLP
CuTeP	CW118C	CuTeP	2.1546	C14500	CuTe 1336	C109	–	CuTeP
CuFe2P	CW107C	CuFe2P	2.1310	C19400	–	CW107C	–	–
Cu-S	CW114C	CuSP	2.1498	C14700	Cu-S 1336	C111	–	Cu-S

Technical characteristics

Designations	Wall Thickness t mm	Tensile Strength R_mN/mm_²min.	Yield Limit at 0.2% Elongation R_p0.2N/mm²	Elongation A %	Hardness
Cu-DHP	CW024A	M	20	–	–	–	–	–	–	–	–

R200^a	20	200	–	110	40	–	–	–	–
H040^a	20	–	–	–	–	40	65	35	60

R250	10	250	150	–	20	–	–	–	–
H070	10	–	–	–	–	70	100	65	95

R290	5	290	250	–	5	–	–	–	–
H095	5	–	–	–	–	95	120	90	115
–
R360	3	360	320	–	–	–	–	–	–
H110	3	–	–		–	110	–	105	–
^a In annealed state.

Tolerances

Nominal Diameter	Tolerances of mean diameter
3^c	10	± 0,06	± 0,12
10	20	± 0,08	± 0,16
20	30	± 0,12	± 0,24
30	50	± 0,15	± 0,30
50	100	± 0,20	± 0,50
100	200	± 0,50	± 1,00
200	300	± 0,75	± 1,50
300	450	± 1,00	± 2,00
^a The tolerances indicated in this column are not applicable to tubes in rolls or coils tubes with OD/T>50 tubes In an annealed state ^b When the diameter is measured at a distance from the ends of the tube of up to 100mm or the equivalent of to a nominal diameter (choosing the lesser of both values), unless otherwise agreed, the tolerance is allowed to be increased by multiplying it by 3. ^c Includes 3.

Nominal exterior diameter	Tolerances of nominal wall thickness t (%)
3^a	40	± 15	± 13	± 11	± 10	–
40	120	± 15	± 13	± 12	± 11	± 10
120	250	–	± 13	± 13	± 12	± 11
250	450	–	–	± 15	± 15	± 15
^a Includes 3.

Nominal exterior diameter	Tolerances of nominal diameter including deviations from the circular shape	Applicable to inner diameter of winding
3^a	6	± 0,30	400
6	10	± 0,50	600
10	20	± 0,70	800
20	30	± 0,90	1000
^a Includes 3.

Select one of the previous options before downloading the personalized file

Custom tab summary

Value Copper 10/10/2022

Previous value 07/10/2022

7.893,84 €/Ton

7.732,31 €/Ton

*Prices Based on the Metals Market of

Documentation download

Title

Other languages

Type

Created

Bronmetal Copper tubes

Type Technical sheets

Created 02/12/2019

INDUSTRIAL SECTOR Bronmetal

Type Catalogue

Created 02/12/2019

Copper tubes for industrial applications

Description

Tolerances of diameter including deviations from circular shape, tubes in rolls or coils

Brass tubes

Brass tubes

Copper alloy tubes

Copper alloy tubes

Round extruded/calibrated bronze tubes

Round extruded/calibrated bronze tubes

Copper tubes for electrical applications

Copper tubes for electrical applications

Contact us

Contact us

Copper tubes for industrial applications

Description

Tolerances of diameter including deviations from circular shape, tubes in rolls or coils

Política de Cookies

Contact us

Contact us