Brass sheets

Rolled brass sheets for industrial and decorative applications.
Possibility of supply with polished and laminated finish.

Supply formats:

Sheet
Flat

Data sheet

Select the different categories of information to generate a personalized PDF file.

Description

Rolled brass sheets for industrial and decorative applications.

Bronmetal can supply rolled brass in sheet and flat format for general applications in annealed, semi-hard and hard state. Possibility of supply with laminated and polished finish.

Alloys

Material Designation	Composition in % (mass fraction)	Density g/cm³
CuZn5	CW500L	min.	94,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,9
max.	96,0	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn10	CW501L	min.	89,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,8
max.	91,0	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn15	CW502L	min.	84,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,8
max.	86,0	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn20	CW503L	min.	79,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,7
max.	81,0	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn30	CW505L	min.	69,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,5
max.	71,0	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn33	CW506L	min.	66,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,5
max.	68,0	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn36	CW507L	min.	63,5	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,4
max.	65,5	0,02	–	–	–	–	0,05	–	0,3	–	0,05	–	–	0,1	–	0,1
CuZn37	CW508L	min.	62,0	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,4
max.	64,0	0,05	–	–	–	–	0,1	–	0,3	–	0,1	–	–	0,1	–	0,1
CuZn40	CW509L	min.	59,5	–	–	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,4
max.	61,5	0,05	–	–	–	–	0,2	–	0,3	–	0,3	–	–	0,1	–	0,2
CuZn35Pb1	CW600N	min.	62,5	–	–	–	–	–	–	–	–	–	0,8	–	–	–	Rest	–	8,5
max.	64,0	0,05	–	–	–	–	0,1	–	0,3	–	1,6	–	–	0,1	–	0,1
CuZn37Pb0,5	CW604N	min.	62,0	–	–	–	–	–	–	–	–	–	0,1	–	–	–	Rest	–	8,4
max.	64,0	0,05	–	–	–	–	0,1	–	0,3	–	0,8	–	–	0,2	–	0,2
CuZn37Pb2	CW606N	min.	61,0	–	–	–	–	–	–	–	–	–	1,6	–	–	–	Rest	–	8,4
max.	62,0	0,05	–	–	–	–	0,2	–	0,3	–	2,5	–	–	0,2	–	0,2
CuZn38Pb2	CW608N	min.	60,0	–	–	–	–	–	–	–	–	–	1,6	–	–	–	Rest	–	8,4
max.	61,0	0,05	–	–	–	–	0,2	–	0,3	–	2,5	–	–	0,2	–	0,2
CuZn39Pb0,5	CW610N	min.	69,0	–	–	–	–	–	–	–	–	–	0,2	–	–	–	Rest	–	8,4
max.	60,5	0,05	–	–	–	–	0,2	–	0,3	–	0,8	–	–	0,2	–	0,2
CuZn39Pb2	CW612N	min.	59,0	–	–	–	–	–	–	–	–	–	1,6	–	–	–	Rest	–	8,4
max.	60,0	0,05	–	–	–	–	0,3	–	0,3	–	2,5	–	–	0,3	–	0,2
CuZn20Al2As	CW702R	min.	76,0	1,8	0,02	–	–	–	–	–	–	–	–	–	–	–	Rest	–	8,4
max.	79,0	2,3	0,06	–	–	–	0,07	0,1	0,1	0,01	0,05	–	–	–	–	0,3

International Equivalences

EN	DIN	ASTM	BS	JIS	SN
CuZn5	CW500L	CuZn5	2.0220	C21000	–	C2100	CuZn5
CuZn10	CW501L	CuZn10	2.0230	C22000	CZ101	C2200	CuZn10
CuZn15	CW502L	CuZn15	2.0240	C23000	CZ102	C2300	CuZn15
CuZn20	CW503L	CuZn20	2.0250	C24000	CZ103	C2400	CuZn20
CuZn28	CW504L	CuZn28	2.0261	–	–	.	CuZn28
CuZn30	CW505L	CuZn30	2.0265	C26000	CZ106	C2600	CuZn30
CuZn33	CW506L	CuZn33	2.0280	C26800	CZ107	C2680	–
CuZn36	CW507L	CuZn36	2.0335	C27000	CZ108	C2700	CuZn36
CuZn37	CW508L	CuZn37	2.0321	C27200	CZ108	C2700	CuZn37
CuZn40	CW509L	CuZn40	2.0360	C28000	CZ109	C2800	CuZn40

EN	DIN	ASTM	BS	JIS	SN
CuZn37Pb0,5	CW604N	CuZn37Pb0,5	2.0332	C33500	–	–	CuZn37Pb0,5
CuZn35Pb1	CW600N	CuZn36Pb1,5	2.0331	C34000	CZ118	C3501	CuZn36Pb1
CuZn35Pb2	CW601N	CuZn36Pb1,5	2.0331	C34200	CZ119	–	CuZn35Pb2
C34500	CZ131
CuZn37Pb1	CW605N	–	–	C35000	CZ131	C3501	–
CuZn37Pb2	CW606N	–	–	C35300	CZ131	C3601	CuZn37Pb2
CuZn36Pb2As	CW602N	–	–	C35330	CZ132	–	–
CuZN36Pb3	CW603N	2.0375	CuZn36Pb3	C36000	CZ124	C3601	CuZn36Pb3
C3602
CuZn38Pb4	CW609N	–	–	–	CZ121/4	C3605	–
CuZn39Pb0,5	CW610N	CuZn39Pb0,5	2.0372	C36500	CZ123	–	CuZn39Pb0,5
CuZn38Pb1	CW607N	–	–	C37000	CZ129	C3501	CuZn38Pb1
CuZn38Pb2	CW608N	–	–	C37700	CZ128	–	CuZn38Pb2
CuZn39Pb2	CW612N	CuZn39Pb2	2.0380	C37700	CZ128	C3771	CuZn39Pb2
CuZn40Pb2	CW617N	CuZn40Pb2	2.0402	C37800	CZ120	C3603	CuZn40Pb2
C38000	C3604
CuZn43Pb2Al	CW624N	CuZn44Pb2	2.0410	C38000	–	–	–
CuZn39Pb3	CW614N	CuZn39Pb3	2.0401	C38500	CZ121/3	C3603	CuZn39Pb3
C3604
CuZn40Pb1Al	CW616N	–	–	–	–	–	CuZn40Pb1
CuZn42PbAl	CW621N	–	–	–	–	–	–
CuZn39Pb1	CW719R	CuZn38Sn1	3.0530	C46400	CZ133	–	CuZn38Sn1
CuZn31Si	CW708R	CuZn31Si	2.0490	–	–	–	–
CuZn37Mn3Al2PbSi	CW713R	CuZn40Al2	2.0550	C67410	CZ 135	–	CuZn40Al2
CuZn35Ni3Mn2AlPb	CW710R	CuZn35Ni	2.0540	–	–	–	–
CuZn40Mn1Pb1	CW720R	CuZn40Mn1Pb	2.0580	–	CZ136	–	CuZn40Mn1Pb1
CuZn40Mn2Fe1	CW723R	CuZn42Mn2	2.0572	–	–	–	CuZn42Mn2
CuZn20Al2As	CW702R	CuZn20Al2	2.0460	C68700	CZ110	C6870	–

Technical characteristics

Designations	Nominal thickness mm	Tensile Strength R_m N/mm²	Proof stress of0,2% R_p0.2 N/mm²	Elongation	Hardness HV	Grain size mm
CuZn5	CW500L	R230	0,2	5	230	280	(max. 130)	36	45	–	–	–	–
H045	–	–	–	–	–	45	75	–	–

R270	0,2	5	270	350	(min. 200)	12	19	–	–	–	–
H075	–	–	–	–	–	75	110	–	–

R340	0,2	5	340	–	(min. 280)	4	8	–	–	–	–
H110	–	–	–	–	–	110	–	–	–

CuZn10	CW501L	R240	0,2	5	240	290	(max.140)	36	45	–	–	–	–
H050	–	–	–	–	–	50	80	–	–

R280	0,2	5	280	360	(min. 200)	13	20	–	–	–	–
H080	–	–	–	–	–	80	110	–	–

R350	0,2	5	350	–	(min. 290)	4	8	–	–	–	–
H110	–	–	–	–	–	110	–	–	–
CuZn15	CW502L	R260	0,2	5	260	310	(max. 170)	36	45	–	–	–	–
H055	–	–	–	–	–	55	85	–	–
G010	0,2	1	(340)	(190)	(50)	–	–	105	–	0,015
G020	0,2	2	(300)	(125)	(50)	–	–	85	0,015	0,030
G035	(290)	(110)	(50)	–	–	75	0,025	0,050

R300	0,2	5	300	370	(min. 150)	16	25	–	–	–	–
H085	–	–	–	–	–	85	115	–	–

R350	0,2	5	350	420	(min. 250)	4	12	–	–	–	–
H105	–	–	–	–	–	105	135	–	–

R410	0,2	5	410	–	(min. 360)	–	–	–	–	–	–
H125	–	–	–	–	–	125	–	–	–
CuZn20	CW503L	R270	0,2	5	270	320	(max. 150)	38	48	–	–	–	–
H055	–	–	–	–	–	55	85	–	–
G010	0,2	1	(340)	(190)	(50)	–	–	105	–	0,015
G020	0,2	2	(300)	(125)	(50)	–	–	85	0,015	0,030
G035	(290)	(110	(50)	–	–	75	0,025	0,050

R320	0,2	5	320	400	(min. 200)	20	28	–	–	–	–
H085	–	–	–	–	–	85	120	–	–

R400	0,2	5	400	480	(min. 320)	5	12	–	–	–	–
H120	–	–	–	–	–	120	155	–	–

R480	0,2	2	480	–	(min. 440)	–	–	–	–	–	–
H155	–	–	–	–	–	155	–
CuZn30	CW505L	R270	0,2	5	270	350	(max. 160)	40	50	–	–	–	–
H055	–	–	–	–	–	55	90	–	–
G010	0,2	1	(410)	(210)	(40)	–	–	120	–	0,015
G020	0,2	2	(360)	(150)	(40)	–	–	95	0,015	0,030
G030	(340)	(130)	(40)	–	–	90	0,020	0,040
G050	(330)	(110)	(40)	–	–	80	0,035	0,070
G075	(310)	(90)	(50)	–	–	70	0,050	0,100

R350	0,2	5	350	430	(min. 170)	21	33	–	–	–	–
H095	–	–	–	–	–	95	125	–	–

R410	0,2	5	410	490	(min. 260)	9	15	–	–	–	–
H120	–	–	–	–	–	120	155	–	–

R480	0,2	2	480	–	(min. 430)	–	–	–	–	–	–
H150	–	–	–	–	–	150	–	–	–
CuZn33	CW506L	R280	0,2	5	280	380	(max. 170)	40	50	–	–	–	–
H055	–	–	–	–	–	55	90	–	–
G010	0,2	1	(410)	(210)	(40)	–	–	120	–	0,015
G020	0,2	2	(360)	(150)	(40)	–	–	95	0,015	0,030
G030	(340)	(130)	(40)	–	–	90	0,020	0,040
G050	(330)	(110)	(40)	–	–	80	0,035	0,070

R350	0,2	5	350	430	(min. 170)	23	31	–	–	–	–
H095	–	–	–	–	–	95	125	–	–

R420	0,2	5	420	500	(min. 300)	6	13	–	–	–	–
H125	–	–	–	–	–	120	155	–	–

R500	0,2	2	500	–	(min. 450)	–	–	–	–	–	–
H155	–	–	–	–	–	155	–	–	–
CuZn36 CuZn37	CW507L CW508L	R300	0,2	5	300	370	(max. 180)	38	46	–	–	–	–
H055	–	–	–	–	–	55	90	–	–
G010	0,2	1	(410)	(210)	(40)	–	–	120	–	0,015
G020	0,2	2,0	(360)	(150)	(40)	–	–	95	0,015	0,030
G030	(340)	(130)	(40)	–	–	90	0,020	0,040
G050	(330)	(110)	(40)	–	–	80	0,035	0,070

R350	0,2	5	350	440	(min. 170)	19	28	–	–	–	–
H095	–	–	–	–	–	95	125	–	–

R410	0,2	5	410	490	(min. 300)	8	12	–	–	–	–
H125	–	–	–	–	–	120	155	–	–

R480	0,2	2	480	560	(min. 430)	3	–	–	–	–	–
150	–	–	–	–	–	150	180	–	–

R550	0,2	2	550	–	(min. 500)	–	–	–	–	–	–
H170	–	–	–	–	–	170	–	–	–
CuZn40	CW509L	R340	0,3	10	340	420	(max. 240)	33	43	–	–	–	–
H085	–	–	–	–	–	85	115	–	–

R400	0,3	10	400	480	(min. 200)	15	23	–	–	–	–
H110	–	–	–	–	–	110	140	–	–

R470	0,3	5	470	–	(min. 390)	6	12	–	–	–	–
H140	–	–	–	–	–	140	–	–	–

CuZn35Pb1 CuZn37Pb0,5 CuZn37Pb2	CW600N CW604N CW606N	R290	0,3	5	290	370	(max. 200)	40	50	–	–	–	–
H060	–	–	–	–	–	60	110	–	–

R370	0,3	5	370	440	(min. 200)	19	28	–	–	–	–
H110	–	–	–	–	–	110	140	–	–

R440	0,3	2	440	540	(min. 370)	5	12	–	–	–	–
H140	–	–	–	–	–	140	170	–	–

R540	0,3	2	540	–	(min.490)	–	–	–	–	–	–
H170	–	–	–	–	–	170	–	–	–
CuZn39Pb2	CW612N	R360	0,3	5	360	440	(max. 270)	30	40	–	–	–	–
H090	–	–	–	–	–	90	120	–	–

R420	0,3	5	420	500	(min. 270)	12	20	–	–	–	–
H120	–	–	–	–	–	120	150	–	–

R490	0,3	5	490	570	(min. 420)	–	9	–	–	–	–
H150	–	–	–	–	–	150	180	–	–

R560	0,3	2	560	–	(min. 510)	–	–	–	–	–	–
H175	–	–	–	–	–	175	–	–	–

CuZn38Pb2 CuZn39Pb0,5	CW608N CW610N	R340	0,3	10	340	420	(max. 240)	33	43	–	–	–	–
H075	–	–	–	–	–	75	110	–	–

R400	0,3	10	400	480	(min. 200)	14	23	–	–	–	–
H110	–	–	–	–	–	110	140	–	–


R470	0,3	5	470	550	(min. 390)	5	12	–	–	–	–
H140	–	–	–	–	–	140	170	–	–

R540	0,3	2	540	–	(min. 490)	–	–	–	–	–	–
H165	–	–	–	–	–	165	–	–	–
CuZn20Al2As	CW702R	R330	3	15	330	–	(min. 90)	–	30	–	–	–	–
H070	–	–	–	–	–	70	105	–	–

R390	3	15	390	–	(min. 240)	–	25	–	–	–	–
H100	–	–	–	–	–	100	–	–	–

Tolerances

Nominal thickness	Thickness tolerances for nominal widths
–	2,5	By agreement	By agreement	By agreement	By agreement
2,5	5,0	± 0,25	± 0,30	± 0,30	± 0,35	± 0,35	± 0,45
5,0	7,5	± 0,35	± 0,45	± 0,40	± 0,50	± 0,45	± 0,55
7,5	10	± 0,45	± 0,60	± 0,50	± 0,65	± 0,55	± 0,75
10	15	± 0,75	± 0,95	± 0,80	± 1,00	± 0,90	± 1,10
15	25	± 0,95	± 1,20	± 1,05	± 1,30	± 1,30	± 1,60
25	50	± 1,30	± 1,60	± 1,40	± 1,75	± 1,50	± 1,90
50	–	± 1,50	± 1,90	± 1,65	± 2,05	± 1,80	± 2,20
1) For all materials, except CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R).
2) For all alloys CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R).

Nominal thickness	Thickness tolerances for nominal widths^a
0.1^b	0,2	± 0,018	–	–	–
0,2	0,3	± 0,022	± 0,03	± 0,04	–
0,3	0,4	± 0,025	± 0,04	± 0,05	± 0,07
0,4	0,5	± 0,03	± 0,05	± 0,06	± 0,08
0,5	0,8	± 0,04	± 0,06	± 0,07	± 0,09
0,8	1,2	± 0,05	± 0,07	± 0,09	± 0,10
1,2	1,8	± 0,06	± 0,08	± 0,10	± 0,11
1,8	2,5	± 0,07	± 0,09	± 0,11	± 0,13
2,5	3,2	± 0,08	± 0,10	± 0,13	± 0,17
3,2	4,0	± 0,10	± 0,12	± 0,15	± 0,20
4,0	5,0	± 0,12	± 0,14	± 0,17	± 0,23
5,0	6,0	± 0,14	± 0,16	± 0,20	± 0,26
6,0	7,0	± 0,16	± 0,19	± 0,23	± 0,29
7,0	8,0	± 0,18	± 0,22	± 0,26	± 0,32
8,0	9,0	± 0,20	± 0,25	± 0,29	± 0,35
9,0	10,0	± 0,22	± 0,28	± 0,32	± 0,38
^a For all alloys CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R), tolerances on thickness must be multiplied by 1.25 and the redult rounded up to 0.01mm
^b includes 0.1.
NOTA – For thicknesses greater than 10 mm, tolerances are those indicated in Norm EN 1653.

Select one of the previous options before downloading the personalized file

Custom tab summary

Value Copper 10/10/2022

Previous value 07/10/2022

7.893,84 €/Ton

7.732,31 €/Ton

Value Zn 10/10/2022

Previous value 07/10/2022

3.104,94 €/Ton

3.124,87 €/Ton

*Prices Based on the Metals Market of

Documentation download

Title

Other languages

Type

Created

Brass sheets

Type Technical sheets

Created 16/03/2020

INDUSTRIAL SECTOR Bronmetal

Type Catalogue

Created 02/12/2019

Brass sheets

Supply formats:

Sheet

Flat

Description

LEAD-FREE BRASS

LEADED BRASS

TOLERANCES ON THICKNESS OF HOT-ROLLED PRODUCTS

TOLERANCES ON THICKNESS OF COLD ROLLED PRODUCTS

Brass wire

Brass wire

Brass tubes

Brass tubes

Brass bars

Brass bars

Copper sheets

Copper sheets

Contact us

Contact us

Brass sheets

Supply formats:

Sheet

Flat

Description

LEAD-FREE BRASS

LEADED BRASS

TOLERANCES ON THICKNESS OF HOT-ROLLED PRODUCTS

TOLERANCES ON THICKNESS OF COLD ROLLED PRODUCTS

Política de Cookies

Contact us

Contact us