Copper alloy sheets

Alloyed copper sheets in sheets of different thicknesses. Two supply formats: sheet and plate.

Supply formats:

  • Sheet

  • Flat

Data sheet: Copper alloy sheets

Bronmetal’s alloyed copper sheets are manufactured according to quality standards to offer a unique and durable product. In our catalogue you will find different thicknesses – from 10 mm to 100 mm – for a wide selection of copper alloys, so that you can choose the one that best suits your needs. In the technical data sheet you can consult the details of all the available alloys with their corresponding chemical composition.

The mechanical characteristics will vary depending on the type of material and thickness. In the technical data sheet section, the tensile strength Rm N/mm2, the conventional yield strength of 0.2% Rp0.2 N/mm2, the elongation -depending on the thickness-, the hardness HV and the grain size are indicated. In addition, we also detail the thickness tolerances for nominal widths of hot-rolled and cold-rolled alloyed copper sheets.

Material Designation Chemical Composition % (m/m) Density g/cm3
Symbolic Numerical Element Cu Be Co Cr Fe Mn Ni Pb Si Zr Total Others approx.
CuBe2 CW101C min. Rest 1,8 - - - - - - - - - 8,3
max. - 2,1 0,3 - 0,2 - 0,3 - - - 0,5
CuCo1Ni1Be CW103C min. Rest 0,4 0,8 - - - 0,8 - - - - 8,8
max. - 0,7 1,3 - 0,2 - 1,3 - - - 0,5
CuCo2Be CW104C min. Rest 0,4 2,0 - - - - - - - - 8,8
max. - 0,7 2,8 - 0,2 - 0,3 - - - 0,5
CuCr1 CW105C min. Rest - - 0,5 - - - - - - - 8,9
max. - - - 1,2 0,08 - - - 0,1 - 0,2
CuCr1Zr CW106C min. Rest - - 0,5 - - - - - 0,03 - 8,9
max. - - - 1,2 0,08 - - - 0,1 0,3 0,2
CuNi1Si CW109C min. Rest - - - - - 1,0 - 0,4 - - 8,8
max. - - - - 0,2 0,1 1,6 0,02 0,7 - 0,3
CuNi2Be CW110C min. Rest 0,2 - - - 1,4 - - - - 8,8
max. - 0,6 0,3 - 0,2 - 2,4 - - - 0,5
CuNi2Si CW111C min. Rest - - - - - 1,6 - 0,4 - - 8,8
max. - - - - 0,2 0,1 2,5 0,02 0,8 - 0,3
CuZr CW120C min. Rest - - - - - - - - 0,1 - 8,9
max. - - - - - - - - - 0,2 0,1
 
EN DIN ASTM BS JIS SN COMMERCIAL DENOMINATIONS
Symbolic Numerical Symbolic Numerical
CuBe1,7 CW100C CuBe1,7 2.1245 C17000 CB101 C1700 - -
CuBe2 CW101C CuBe2 2.1247 C17200 - C1720 - Elmedur B2
Mallory 73
CuBe
CuCo2Be CW104C CuCo2Be 2.1285 C17500 C112 - - Elmedur HA
CB4
Mallory 100
Class 3
NS
CuNi2Be CW110C CuNi2Be 2.0850 C17510 - - - -
CuCo1Ni1Be CW103C - - - - - - Elmedur HA
CB4
Mallory 100
Class 3
NS
CuCr1Zr CW106C CuCr1Zr 2.1293 C18150 CC102 - - Elmedur X
CRM16
Mallory 328
Class 2
CCS/Z
CuZr CW120C CuZr 2.1580 C15000 - - - -
- - - - C18000 - - CuNi2SiCr Ampco 940
NS5
Elbrodur D
CuNi2Si CW111C CuNi2Si 2.0855 C64700 - - - -
CuNi3Si CW112C CuNi3Si 2.0857 C70250 - - - -
CuNi10Fe1Mn CW352H CuNi10Fe1Mn 2.0872 C70600 CN102 C7060 - -
CuNi30Mn1Fe CW354H CuNi30Mn1Fe 2.0882 C71500 CN107 C7150 - -
TuCo 80/20 30w3
TuCo 75/25 10w3
CuNi12Zn29 CW405J - - C76200 - - - -
CuNi18Zn27 CW410J CuNi18Zn27 2.0742 C77000 NS107 C7701 - -
CuNi7Zn39Pb3Mn2 CW400J - - C79800 - - - -
CuNi10Zn42Pb2 CW402J - - C79620 NS101 - CuNi10Zn42Pb2 -
CuNi12Zn24 CW403J CuNi12Zn24 2.0730 C75700 NS104 - CuNi12Zn24 -
CuNi12Zn25Pb1 CW404J - - C79200 - - CuNi12Zn25Pb -
CuNi12Zn30Pb1 CW406J CuNi12Zn30Pb1 2.0780 C79300 - - - -
CuNi12Zn38Mn5Pb2 CW407J - - C79860 - - - -
CuNi18Zn19Pb1 CW408J CuNi18Zn19Pb1 2.0790 C76300 NS113 - - -
 
Designations Nominal thickness mm Tensile Strength Rm N/mm2 Yield Limit at 0,2% Rp0.2 N/mm2 Elongation Hardness HV Grain size mm
A50 mm
for thicknesses up to 2.5mm inc.
% min.
A
for thicknesses greater than 2.5mm
% min.
Material
Metallurgical State
Symbolic Numerical from up to and including min. max min. max min. max.
CuBe2 CW101C R410
1
15
410 - (max. 250) 20 20 - - - -
H090 - - - - - 90 150 - -
R1130
1
15
1130 - (min. 890) 3 3 - - - -
H340 - - - - - 340 410 - -
R580
1
15
580 - (min. 510) 8 8 - - - -
H180 - - - - - 180 250 - -
R1200
1
15
1200 - (min.980) 2 2 - - - -
H360 - - - - - 360 420 - -
CuCo1Ni1Be CuCo2Be CuNi2Be CW103C CW104C CW110C R240
1
15
240 - (max. 220) 20 20 - - - -
H060 - - - - - 60 130 - -
R480
1
15
480 - (min. 370) 2 2 - - - -
H140 - - - - - 140 180 - -
R650
1
15
650 - (min. 500) 8 8 - - - -
H200 - - - - - 200 280 - -
R750
1
15
760 - (min. 650) 5 5 - - - -
H210 - - - - - 210 290 - -
CuNi2Si CW111C R260
1
10
260 - (min. 60) 28 - - - - -
H070 - - - - - 70 100 - -
R490
1
10
490 - (min. 340) 11 - - - - -
H140 - - - - - 140 190 - -
R450
0,6
3
450 - (min. 360) 2 - - - - -
H130 - - - - - 130 180 - -
R640
0,6
3
640 - (min.590) 8 - - - - -
H170 - - - - - 170 220 - -
   
Material Thickness mm
Tensile Strength
Rm
N/mm2
Yield Limit at 0,2%
Rp0.2
N/mm2
Elongation at break Hardness
A5 % min. A10 % min. AL50 % min.
Abbreviation Number HV HB
Alloy Condition min. max. min. max.
without annealing templar annealed
CuCrZr
2.1293
F37
.60
desde 3 mín. 370 mín. 270 12 - - - - - -
H125 hasta 15 - - - - - 125 155 120 150
F33
.53
desde 0,3 mín. 330 mín. 310 10 - - - - - -
H95 hasta 10 - - - - - 95 120 90 115
F44
.73
desde 0,3 mín. 440 mín. 390 10 - - - - - -
H140 hasta 10 - - - - - 140 180 135 170
F49
.79
desde 0,3 mín. 490 mín. 450 8 - - - - - -
H155 hasta 6 - - - - - 155 200 150 190

TOLERANCES ON THICKNESS OF HOT-ROLLED PRODUCTS

Nominal thickness Tolerances on thickness, for nominal widths of
Up to and including 700 Greater than 700, up to and inc. 1000 Greater than 1000, up to and inc. 1500 Greater than 1500
Greather than Up to and including 1) 2) 1) 2) 1) 2)
- 2,5 By agreement By agreement By agreement By agreement
2,5 5,0 ± 0,25 ± 0,30 ± 0,30 ± 0,35 ± 0,35 ± 0,45
5,0 7,5 ± 0,35 ± 0,45 ± 0,40 ± 0,50 ± 0,45 ± 0,55
7,5 10 ± 0,45 ± 0,60 ± 0,50 ± 0,65 ± 0,55 ± 0,75
10 15 ± 0,75 ± 0,95 ± 0,80 ± 1,00 ± 0,90 ± 1,10
15 25 ± 0,95 ± 1,20 ± 1,05 ± 1,30 ± 1,30 ± 1,60
25 50 ± 1,30 ± 1,60 ± 1,40 ± 1,75 ± 1,50 ± 1,90
50 - ± 1,50 ± 1,90 ± 1,65 ± 2,05 ± 1,80 ± 2,20
1) For all materials, except CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R)
2) For all alloys CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R)

TOLERANCES ON THICKNESS OF COLD ROLLED PRODUCTS

Nominal thickness Tolerances on thickness, for nominal widths of a
Greather than Up to and including Up to and including 350 greather than 350 Up to and including 700 Greater than 700, up to and inc. 1000 Greater than 1000, up to and inc. 1250
0.1b 0,2 ± 0,018 - - -
0,2 0,3 ± 0,022 ± 0,03 ± 0,04 -
0,3 0,4 ± 0,025 ± 0,04 ± 0,05 ± 0,07
0,4 0,5 ± 0,03 ± 0,05 ± 0,06 ± 0,08
0,5 0,8 ± 0,04 ± 0,06 ± 0,07 ± 0,09
0,8 1,2 ± 0,05 ± 0,07 ± 0,09 ± 0,10
1,2 1,8 ± 0,06 ± 0,08 ± 0,10 ± 0,11
1,8 2,5 ± 0,07 ± 0,09 ± 0,11 ± 0,13
2,5 3,2 ± 0,08 ± 0,10 ± 0,13 ± 0,17
3,2 4,0 ± 0,10 ± 0,12 ± 0,15 ± 0,20
4,0 5,0 ± 0,12 ± 0,14 ± 0,17 ± 0,23
5,0 6,0 ± 0,14 ± 0,16 ± 0,20 ± 0,26
6,0 7,0 ± 0,16 ± 0,19 ± 0,23 ± 0,29
7,0 8,0 ± 0,18 ± 0,22 ± 0,26 ± 0,32
8,0 9,0 ± 0,20 ± 0,25 ± 0,29 ± 0,35
9,0 10,0 ± 0,22 ± 0,28 ± 0,32 ± 0,38
a For all alloys CuAl8Fe3 (CW303G), CuNi10Fe1Mn (CW352H), CuNi30Mn1Fe (CW354H) y CuZn20Al2As (CW702R), tolerances on thickness must be multiplied by 1.25 and the redult rounded up to 0.01mm
b includes 0.1.
NOTE - For thicknesses greater than 10 mm, tolerances are those indicated in Norm EN 1653.
   

Documentation download

Title
Other languages
Type
Created
Type Catalogue
Created 07/07/2020
Type Technical sheets
Created 29/03/2022
You may also like

Bimetal strip

Copper sheets

Flat copper bar / rectangular bar

Copper alloy strips